Home > Brands > Sparco
Sort By:
Page of 2
Sparco Gloves Land RG3 Sparco Gloves Land RG3

The Land RG-3.1 has been redesigned for 2016. The Land RG-3.1 glove is our entry-level competition glove that provides excellent protection and feedback. The ergonomic palm design with reinforced stitching conforms to the hand’s position. The palm has been redesigned with new suede anti-slip fingertip and palm grips to provide greater performance. The elastic wrist and wide range of sizes helps ensure proper fitment. Available in black, blue and red. The Land RG-3 is SFI and FIA approved. *Features* * Ergonomic palm design with reinforced stitching conforms to the hand’s position * New suede anti-slip fingertip and palm grips provide greater performance * SFI and FIA approved

Our Price: $85.00
Sparco Strwl Hub Subaru Impreza 93-04 Sparco Strwl Hub Subaru Impreza 93-04

To properly install a Sparco Steering Wheel, use a Sparco Hub Adapter.  Steering wheel hub adapters are required to install 6 bolt Sparco wheels into your vehicle.

Our Price: $85.00
Sparco Strwl Hub Nissan 240SX 89-94 Sparco Strwl Hub Nissan 240SX 89-94

To properly install a Sparco Steering Wheel, use a Sparco Hub Adapter. Steering wheel hub adapters are required to install 6 bolt Sparco wheels into your vehicle.

Our Price: $90.00
Sparco Strwl Hub Nissan 240SX 95-98 Sparco Strwl Hub Nissan 240SX 95-98

To properly install a Sparco Steering Wheel, use a Sparco Hub Adapter. Steering wheel hub adapters are required to install 6 bolt Sparco wheels into your vehicle.

Our Price: $90.00
Sparco Strwl Hub Nissan Skyline C110 Sparco Strwl Hub Nissan Skyline C110

To properly install a Sparco Steering Wheel, use a Sparco Hub Adapter. Steering wheel hub adapters are required to install 6 bolt Sparco wheels into your vehicle.

Our Price: $90.00
Sparco Strwl Hub Nissan 300ZX Sparco Strwl Hub Nissan 300ZX

To properly install a Sparco Steering Wheel, use a Sparco Hub Adapter. Steering wheel hub adapters are required to install 6 bolt Sparco wheels into your vehicle.

Our Price: $90.00
Sparco Strwl Hub Nissan 350Z Sparco Strwl Hub Nissan 350Z

To properly install a Sparco Steering Wheel, use a Sparco Hub Adapter. Steering wheel hub adapters are required to install 6 bolt Sparco wheels into your vehicle.

Our Price: $90.00
Sparco Shoe Race Sparco Shoe Race

Developed exclusively for the U.S. market, the Race driving shoe provides comfort and control. It features a wide toe box and an extra cushioned sole for greater comfort and an additional comfort cell on the ball of the foot to help reduce shock and vibration. Stylistically, the Race shoe offers an aggressive design with a suede upper and boot cut design with Velcro closure. Available in black, blue and red in sizes from 7.5 to 13. The Race is SFI approved. * Wide toe box and an extra cushioned sole for greater comfort * Additional comfort cell on the ball of the foot to help reduce shock and vibration * Suede outer shell and boot cut design with Velcro closure * SFI Approved

Our Price: $100.00
Sparco Strwl Hub Subaru Impreza / Sti w/ Airbag Resistors Sparco Strwl Hub Subaru Impreza / Sti w/ Airbag Resistors

To properly install a Sparco Steering Wheel, use a Sparco Hub Adapter.  Steering wheel hub adapters are required to install 6 bolt Sparco wheels into your vehicle.

Our Price: $100.00
Sparco Base Nissan 350Z 03-08 Tall Lf Sparco Base Nissan 350Z 03-08 Tall Lf

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Nissan 350Z 03-08 Low Lft Sparco Base Nissan 350Z 03-08 Low Lft

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Nissan 350Z 03-08 6 Spd R Sparco Base Nissan 350Z 03-08 6 Spd R

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Nissan 240SX 89-98 Lft Sparco Base Nissan 240SX 89-98 Lft

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Nissan 240SX 89-98 Low Lf Sparco Base Nissan 240SX 89-98 Low Lf

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Nissan 240SX 89-98 Low Rt Sparco Base Nissan 240SX 89-98 Low Rt

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Nissan 240SX 89-98 Rt Sparco Base Nissan 240SX 89-98 Rt

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Nissan 300ZX 90-96 Lft Sparco Base Nissan 300ZX 90-96 Lft

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Nissan 300ZX 90-96 Rt Sparco Base Nissan 300ZX 90-96 Rt

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Infiniti G35 03+ Lf Sparco Base Infiniti G35 03+ Lf

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Infiniti G35 03+ Low Lft Sparco Base Infiniti G35 03+ Low Lft

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Infiniti G35 03+ Rt Sparco Base Infiniti G35 03+ Rt

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Nissan 370Z 08+ Lft Sparco Base Nissan 370Z 08+ Lft

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat


Our Price: $140.00
Sparco Base Nissan 370Z 08+ Rt Sparco Base Nissan 370Z 08+ Rt

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Nissan Skyline 89-98 Lft Sparco Base Nissan Skyline 89-98 Lft

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat


Our Price: $140.00
Sparco Base Nissan Skyline 89-98 Rt Sparco Base Nissan Skyline 89-98 Rt

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Nissan GTR 11+ Lft Sparco Base Nissan GTR 11+ Lft

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Nissan GTR 11+ Rt Sparco Base Nissan GTR 11+ Rt

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Datsun 240Z 70-74.5 Lft Sparco Base Datsun 240Z 70-74.5 Lft

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Datsun 240Z 70-74.5 Rt Sparco Base Datsun 240Z 70-74.5 Rt

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00
Sparco Base Datsun 280Z 74.5-78 Lft Sparco Base Datsun 280Z 74.5-78 Lft

Sparco Seat Bases utilize the factory seat mounts on your vehicle's floor and provide a flat surface for mounting your Sparco seat. All seat bases are vehicle specific and provide a 100% bolt-in installation.

The 600 Series Sparco seat base is constructed with 3/16" thick steel to provide a strong flex-free mount. In addition to the mouting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. The base is powder coated in a black wrinkle finish.

In order to properly install a Sparco seat in your vehicle, you will need one (1) of each of the following, per seat:

Bottom Mount Seat (Street Series Seats)

  • Seat Base (600 series)
  • Track Set (#00493)*
  • Bottom Mount Hardware Kit (#50001)
Side Mount Seat (Competition Series Seats)
  • Seat Base (600 series)
  • Track Set (#00493)*
  • Side Mount (steel #004902, or aluminum #600W)
  • Side Mount Hardware Kit (#50002)

*The Track Set allows for forward and backward adjustment of the seat

Our Price: $140.00